Home Building Stories
Stories and Real Advice from Non-Professional Home Builders
Members Log In Here
User Name:
Password:

Sign Up

SPAM is not allowed on this site. Building topics only! HTML is allowed if you have your own user name and password.

Return to Table of Contents

From: Roger King
Date: 06-30-07 21:49 pm
Subject: Painting a Room's Woodwork and the Trim
ID: 1

Message: Painting a Room's Woodwork and the Trim Around Doors and Windows Opens Up Design Potential
By Roger King


When painting woodwork, start at the top of the room and work down: ceiling
molding, doors, windows, chair-rail moldings, then baseboards, save wear and tear on your knees when painting baseboards by wearing knee pads or by kneeling on a cushion. The edge of woodwork is sometimes curved or very narrow, less than one inch, making it difficult to paint them neatly. Vertical edges of windows and door casings not only are narrow but also are often at an angle that is difficult to reach easily with a paintbrush.

It is sometimes a good idea to paint the woodwork before painting the walls,
overlapping the walls slightly as you work on the woodwork. You find it easier to
paint a straight edge along a wall than along the edges of narrow or curved
woodwork. Be sure to protect freshly painted woodwork when working with a roller
on walls. Before removing paint from woodwork, test the surface for old lead paint.
The dust produced by sanding can carry the lead paint throughout the house,
posing a serious health threat.

Painting woodwork requires a slightly different technique than covering the walls
and ceilings does. The sweeping motions of using a roller give way to the control
and precision of using a brush on a small surface. Also, brush marks are more likely
to occur on wood than on plaster or drywall. You can choose a bold color to
contrast with the color of walls and ceilings, or use the woodwork as a frame to
highlight the color of the walls. If the woodwork is quite ordinary, you can make it
blend into the background.

Whether the woodwork has been painted before or not, wood must be properly
prepared before being painted. In general, this means filling any cracks and holes
and then sanding the surface. To sand concave surface, wrap the paper around a
section of hose or pipe. Large flat surfaces can be sanded with a sheet of paper
wrapped around a wood block. The sanding gives the surface tooth, or something to
which the new paint can adhere.

About The Author: Roger King has been writing articles on decorative interior painting for several years, and has been helping people find and review the best value for interior painting solutions. Visit his web site www.decorativeinteriorpainting.com for free tips and guides for your next painting project

Article Source: http://EzineArticles.com/?expert=Roger_King
http://EzineArticles.com/?Painting-a-Rooms-Woodwork-and-the-Trim-Around-Doors-and-Windows-Opens-Up-Design-Potential&id=157033


Return to Table of Contents

Thread:
Structural Design - David Bailey 08-22-06 07:34 am
      Structural Design in our Cabin - David Bailey 08-24-06 01:44 am
            Structural Design in our Cabin - David Bailey 09-02-06 08:16 am
                  Windows and Doors - David Bailey 08-11-06 19:05 pm
                        Painting a Room's Woodwork and the Trim  - Roger King 06-30-07 21:49 pm


Respond to this message Here:

From:

Email: (optional)

Subject:

Add Picture (jpg only)
or File
(Word, Excel, PDF, Gif, PNG or text):

Message:

 

Follow Tigger as he travels the world.  Travel photos and valuable advice from people who have been there already!
Tigger Travels
Click here for more information

Administer This Page
This site is designed and maintained by the team at Sand Dollar Digital Design ©August 2006
Report abuses and other comments about this site to Sand Dollar Digital Design

 

Restaurants, shops and places to stay in Port Aransas, Texas.  One stop for all your vacation needs on your next vacation to the Texas Gulf Coast.
Port Aransas Visitors Guide
Click here for more information